Wizards Finish Cut Cutting Compound, Removes Scratches and Swirls – 32 oz

ONE-STEP SHOW-CAR GLOSS – Finish Cut is a one-step polishing compound that levels fine scratches, heavy swirls, cobwebbing, and overspray in a single pass. With no wax, silicone, or crystalline silica, the water-based formula buffs out cleanly and leaves no staining, etching, or dusting on fresh or aged finishes.
LEVELS HEAVY DEFECTS – As a scratch remover, Finish Cut lifts cobwebbing, light overspray, and surface oxidation in a single pass across single-stage and two-stage finishes. Water-based and without crystalline silica, the formula cuts evenly on fresh or aged work and dries down to a deep, even gloss for show-floor results.
FROM PAINT TO GELCOAT – Use Finish Cut on clear coat, single-stage paint, gelcoat, and fiberglass without staining or etching the surface beneath. From show car bodywork to motorcycle tanks and boat hulls, one bottle handles the job. The water-based body rinses off pads and panels quickly when the job is done.
BUILT FOR MARINE WORK – For marine use, Finish Cut handles exterior defect removal on gelcoat, painted hulls, and fiberglass topsides. The formula knocks down swirls, light oxidation, and minor scratches on average gel surfaces without leaving silicone or wax residue to interfere with later detail coats or wax application.
PRO BUFFING WORKFLOW – Finish Cut sets up for buffing at 1400 to 2200 RPM with a wool pad, then finishes at 1000 RPM with a foam pad to dial in show-car depth. The water-based body keeps cleanup quick and the formula is engineered to follow Turbo Cut and other Wizards cutting compounds without re-scratching the panel.