Headlight Restoration Kit with 200ml Repair Fluid

Restore Cloudy Headlights with a DIY Restoration System

Cloudy, yellowed and oxidized headlights can make an otherwise well-maintained vehicle look aged. The QUNNIE Headlight Restoration Kit provides a complete DIY solution for preparing and refinishing plastic headlight surfaces at home.

The restoration process combines wet sanding with a heated coating application. First, remove oxidation, yellowing and surface imperfections by sanding from coarse to fine grit. After the surface is evenly polished, clean and dry the headlight before applying the heated repair solution.

How to Use:

Inspect the headlight and identify areas affected by yellowing, haze, oxidation or surface scratches.

Wet-sand the headlight using the included sandpaper, working from coarse to fine grit. Keep the surface wet during sanding to help control heat and improve sanding performance.

Thoroughly rinse and wipe the headlight. Make sure the surface is evenly sanded, clean and completely dry before proceeding.

Pour the repair solution into the heating cup according to the included instructions. Allow the solution to heat before beginning the application process.

Apply the heated vapor evenly across the prepared headlight surface. Avoid touching the treated surface with hard objects during the recommended curing period.Package Includes:

1 × Heating Cup

1 × 200ml Headlight Repair Fluid

1 × Flat Lid

1 × Corner Cover

1 × Car Power Cord

1 × 220V Home Power Cable

1 × Funnel

1 × Protective Tape

2 × Sealing Rings

1 × Emery Board

6 × Sandpaper

1 × Instruction Manual

1 × Plastic Storage Case

Important: Proper sanding and surface preparation are critical to the restoration result. Follow the included instructions carefully. Wear appropriate protective equipment during use and keep the product away from children, pregnant individuals and anyone who should not be exposed to the product or its vapors.

RESTORE CLOUDY HEADLIGHTS AT HOME – The QUNNIE headlight restoration kit is designed for DIY restoration of yellowed, hazy and oxidized plastic headlight surfaces. It helps refresh the appearance of aged headlights through sanding and coating.
WET SANDING + HEATED COATING – The restoration process combines surface preparation with a heated coating application. Sand away oxidation and surface imperfections, then apply the repair solution according to the included instructions.
COMPLETE DIY RESTORATION PROCESS – Prepare the headlight by wet-sanding from coarse to fine grit, then rinse, clean and dry the surface thoroughly. Apply the heated solution only after the surface has been properly prepared.
200ML REPAIR FLUID INCLUDED – The kit includes 200ml of headlight repair solution. The manufacturer states that one bottle can restore approximately 2 headlights; actual coverage depends on headlight size, surface condition, sanding results and application technique.
KIT CONTENTS AND IMPORTANT LIMITATIONS – Includes the heating cup, repair fluid, power cables, funnel, protective tape, sealing rings, emery board, sandpaper, instruction manual and storage case. Designed for restoring suitable plastic headlight surfaces; it is not presented as a structural repair for cracked or broken headlight lenses. Follow all instructions and safety precautions before use.