GELRHONR OBD Power Cable for Dash Camera, Right Angle USB C OBD2 Dash Cam Power Cable with Switch Button 24 Hours Surveillance/Acc Mode 12-24V to 5V 23A, for Dashcam, GPS or Radar-3.5M/11.5Ft

Application: OBD Power Cable for Dash Camera, is suitable for the OBD port and dashcam. It has two modes: One click to switch: Work on/off with the engine or 24hour recording. Easily power your dash cameras, radar decetor, GPS without dealing with complex hardware kit
Attention: This USB C OBD2 power adapter does not support new energy vehicles. Suits for most dashcam, may not be compatible with some dashcam which use A8-B8 signal pins
Two working mode: 2 modes are toggles by a switch on the OBD port. Mode”—”: Parking monitoring mode, Surveillance mode provides 24 hr power w/ low voltage protection that shuts down the device to keep it from killing the battery. Mode”O”: ACC mode, at this mode your dash camera will turn On/Off when engine turn On/Off
Low voltage protection: OBD2 dash cam power cable has a built-in MCU intelligent control chip, which can detect the battery power of the in real time. When the power drops to the low-voltage(11.6V) protection value of the OBD cable, the OBD line automatically enters the low-voltage protection and turns off the output!
USB C USB Plug 90°Angled “L” design: perfect for space saving and connection in narrow space. And can make for better cable management in some situations. So if your camera is quite big or the port is on the sides this obd to usbc dashcam cable will perfect for it
Plug and play, easy to install: Plug and play, do not destroy the original circuit. It simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics. Type C OBD Power Cable is long enough to reach front or rear of the vehicle