ORIA Refrigerator Thermometer, Wireless Digital Freezer Thermometer with 2 Sensors, Indoor Outdoor Thermometer, Audible Alarm, Min and Max Display, LCD Display for Home, Restaurants

Note: 1. The host and the transmitter can receive good reception within 100 meters of the unobstructed distance. Indoor temperature detection range -10°C-60°C (32°F-122°F); Outdoor sensor temperature receiving range -40°-60° (-40°F-140°F); 2. After the temperature alarm is turned on, the alarm function will not be activated until 10 minutes later (when it is just turned on, no matter whether the temperature reaches the alarm temperature range at this time, it will not alarm) 3. Please place this thermometer properly to prevent the screen from being crushed.
Max/Min Temperature: The Max/ Min temeprature data will update every 24h. Pls be attention that the product cannot hold the max/min temperature all the time. The product is not support to view all the recorded previous temperatures. You can press button CLEAR once quickly to remove the Min/Max temperaturen data. And it will update to the new data. The indoor temperature detection cycle is 10 seconds, the outdoor synchronous cycle sensor 1 is 57 seconds, and sensor 2 is 67 seconds.
Alarm Function: With audible alarm, you can set the maximum and minimum alarm value manually. It can ring when the temperature value reaches at the point of limit max or min alarm value that you pre-set. After turning on the temperature alarm, the alarm function will only start after 10 minutes (when it is first turned on, regardless of whether the temperature has reached the alarm temperature range, it will not sound an alarm)
Easy to Use & Install: There are 6 function keys on the main unit and signal indicator on the transmitter, you just press the corresponding key to turn on/off the alarm, switch the Celsius or Fahrenheit. With integrated magnets, a hanging hole and a bracket at the back, you can put the main unit in refrigerator door, hang on the wall or stand on the table.
NOTE: 1. Please install the new battery to make sure the accuracy. If the screen does not display content, please check to ensure that the transmitter is connected to the host. 2. If you buy 2 sets, they will conflict with each other. In this case, install one of these first. Then install the other one after the first thermometer has been connected firmly.