[2 Pack] Polyurethane Windshield Adhesive — Fast Curing Urethane Auto Glass Glue, High Bond Strength Black Windshield Sealant for Vehicle & RV Window Seal, OEM Quality with Gloves, American Owned

2 Pack Vavlue! Immediate Strength Development

This fast-curing automotive window glue boasts exceptional bonding power.

One application of the glass adhesive glue is all it takes for permanent weather-resistant protection.

From windshield and glass sealer to RV window sealant, this compound can do it all.

Directions for Use:

– Detach wipers and accents, then use a utility knife to slice through the current urethane sealer
– Remove existing glass with care, and carefully clean debris from all surfaces
– Align and dry set the new glass using tape strips for positioning. Once marked, remove the windshield
– Remove the majority of the old car glass adhesive from the pinch-weld, leaving only a small layer
– Apply single-step primer* to any bare metal and conduct any required abrasive cleaning
– Clean the interior surface where contact will be made with windshield and glass sealant
– Apply a thin layer of primer* around the edge and let dry
– Cut the applicator tip on the windshield leak sealant to desired size
– Directly apply this windshield mount adhesive over the old auto window sealant
– Position the glass using the tape markings, and press into place to complete contact
– Squeeze out extra urethane windshield adhesive, or fill voids if necessary
– Remove the tape alignment strips, reattach moldings, wipers, and other accents
– Finally, clean up any excess windshield urethane adhesive

* To use without primer, ensure the bonding surface is free from contamination prior to application of the car windshield sealant.
The glass must also be pre-cleaned with a non-antistatic glass cleaner.

Additional Instructions: Designed for use at an ambient temperature of 42-95 F.
Place the car windshield adhesive in a plastic bag and submerge it in hot water before use for best results.

FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours. OEM-level performance for auto glass replacement and repair on cars, trucks, SUVs, and RVs.
HIGH BOND STRENGTH — WON’T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather. The cured seal stays flexible without shrinking or cracking — critical for maintaining a watertight windshield over the life of the vehicle.
WORKS ON ALL VEHICLE GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on any vehicle. Bonds glass to metal, fiberglass, and painted surfaces. One cartridge handles a full windshield — the 2-pack covers multiple vehicles or provides a spare for future jobs.
EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Each pack includes disposable nitrile gloves for professional results every time.
2-PACK — AMERICAN OWNED BUSINESS — Two cartridges of black urethane windshield adhesive from a family-owned American business. Keep one in the shop and one in the truck — you’ll always have professional-grade glass adhesive ready when you need it.